Tuesday, 21 September 2021
Inventory Management MCQ Multiple Choice Questions with Answers
Tuesday, 20 July 2021
Multiple Choice Question on Industrial Safety Management
1. Water is used to extinguish
A. Class-A fires
B. Class-B fires
C. Class-C fires
D. All of the above
2. Which accidents should be reported to management?
B. Major accidents
C. Which causes damages to machine
D. All
3. Who may be responsible for accident?
B. Working conditions
C. Management
D. All of the above
4. Class-A fire consists of fire due to
B. Oil
C. Transformer
D. Chemical
5. Safety management deals with qualified______________.
B. Prevention of an accident
C. Damage to the equipment
D. Loss of life
6. For household wiring and small units, the following should be used for safety measure
B. ACB
C. OCB
D. MCCB
7. Industrial safety management is that branch of management which is concerned with ______ hazards from the industries.
B. Reducing
C. Eliminating
D. All of the above
B. Fuel
C. Temperature
D. Heat
9. Which of the following colour is used for radiation hazard?
B. Orange
C. Green
D. Purple
10. Which is not included in the causes of accidents due to worker?
B. Poor housekeeping
C. Leak of concentration
D. Overconfidence
11. Industrial accidents have following types
B. Machinery
C. Both a and b
D. None of the above
12. _____ improves the safety in an industry
A. Reduced noise level
B. Good house keeping
C. Material handling system
D. All of the above
13. The following class of fire occur in electrical equipment
A. Class-A fires
B. Class-B fires
C. Class-C fires
D. All of the above
14. Which of the following is an unsafe condition.
A. Improper material handling
B. Hazardous arrangement of material
C. Poor house keeping
D. Long working hours
15. Most of the industrial accidents are
A. Unavoidable
B. Not preventable
C. Preventable
D. None of the above
A. Work area, material, machine, tools
B. Men, machine, material, tools
C. Men, machine, work area, tools
D. Men, work area. Material, tools
17. A safety programme consists of
A. Three E’s
B. Four E’s
C. Five E’s
D. Six E’s
Answers-
1-A,2-D,3-D,4-A,5-B,6-A,7-D,8-C,9-D,10-D,11-C,12-A,13-C,14-D,15-C,16-A,17-B.
Friday, 25 June 2021
Maintenance Management MCQ Multiple Choice Questions with Answers
1. Total productive maintenance aims at
A. Less idle time
B. Increase in productivity
C. Zero down time
D. None of the above
2. Maintenance
consist of the following action(s)
A. Replace of component
B. Repair of component
C. Service of component
D. All of the above
3. (Down time in hours / Available
hours) =
A. Maintenance effectiveness
B. Frequency of breakdown
C. Effectiveness of maintenance
planning
D. None of the above
4. The down time cost consists of
A. Loss of production
B. Wages paid to the workers
C. Reduction in sales
D. All of the above
5. A systematic approach for
maintenance is
A. Problem – Cause – Diagnosis –
Rectification
B. Problem– Diagnosis – Cause –
Rectification
C. Problem – Measure – Diagnosis –
Rectification
D. Problem– Diagnosis – Measure –
Rectification
6. The following is not a classification
of maintenance
A. Corrective maintenance
B. Timely maintenance
C. Scheduled maintenance
D. Preventive maintenance
7. The ____ goes on increasing
with the increase in degree of maintenance efforts.
A. Cost of down time
B. Cost of spares and maintenance
C. Labor and Overhead Cost
D. All of the above
8. The following is not a
classification of maintenance
A. Timely maintenance
B. Corrective maintenance
C. Scheduled maintenance
D. Preventive maintenance
9. With the increase in preventive
maintenance cost, breakdown maintenance cost
A. Increases
B. Decreases
C. Remain same
D. Any of the above
Answers-
1-C,2-D,3-A,4-D,5-A,6-B,7-C,8-A,9-B.
Wednesday, 9 June 2021
MCQs on Material Handling
1. Raw
Materials and WIP can be classified under ________
A. Direct Material
B. Indirect Material
C. Finished Material
D. Standard Parts
2. Material handling consists of
movement of material from
A. One machine to another
B. One shop to another shop
C. Stores to shop
D. All
of the above
3. The following is used to transport materials having flat bottoms
A.
Belt conveyor
B.
Roller conveyor
C.
Chain conveyor
D. None of the above
4. _________
are the basic materials which have not undergone any conversion since their
receipt from suppliers.
A. WIP
B. Raw Material
C. Finished Parts
D. Work Made Parts
5. Economy in material handling
can be achieved by
A. Employing gravity feed movements
B. Minimizing distance of travel
C. By carrying material to destination without using manual labour
D. All of the above
6. The
business cycle, price trends, National Economy is ___________
A. Micro Factors
B. Macro Factors
C. Controllable Factors
D. None of the above
7. Fork lift truck is used for
A.
Lifting and lowering
B.
Vertical transportation
C.
Both ‘a’ and ‘b’
D. None
of the above
8. _______also
called part lists or building lists is the document generated at the design
stage.
A. MRP (Material Requirement Planning)
B. BOM (Bill of Materials)
C. MPS (Master Production Schedule)
D. None of the above
9. Special purpose material handling equipment are used in
A.
Process layout
B.
Line layout
C. Both ‘a’ and ‘b’
D. None of the above
A. Very wet
B. Very dry
C. Average dampness
D. Grease
Answers-
1-A,2-D,3-B,4-B,5-D,6-B,7-C,8-B,9-B,10-D